IMat's Mechanical Properties Characterization Facility

For the past two years, the former Mechanical Properties Research Laboratory (MPRL) has been transitioning into a user facility administered through the Institute for Materials (IMat).  This new user facility, now called the Mechanical Properties Characterization Facility (MPCF), features equipment rentals, staff time for training, and materials & supplies charged through SUMS.

Details including costs to use the facilities can be found on our website, mpcf.gatech.edu. 

MPCF has a full-time Research Engineer, Dr. James Collins, who provides training on the use of a variety of mechanical test systems, and helps coordinate the usage.  MPCF staff can provide support in setting up test programs, designing accessories and adapters, developing new protocols, integrating new sensors and transducers, developing control algorithms, etc.  A wide range of materials can be and have been tested in MPCF including all sorts of metal alloys, polymers, ceramics, and different types of composites, as well as testing of components.  MPCF staff also perform routine maintenance and repairs to keep systems in a state of readiness to ensure users of the facility obtain good data in a minimal amount of time.

The MPCF presently occupies a total of 4250 sq. ft. across three buildings [2500 sq. ft. in Bunger-Henry (rooms 153, 158, and 173), 1250 sq. ft. in Callaway (MaRC) Hi-bay lab and 500 sq. ft. in MRDC 2340].

Major equipment and tools include:

• Servohydraulic test systems (14 with capacities ranging from 5 to 100 kips (22 kN to 440 kN), which gives us the flexibility to match the user with the appropriately sized test system
• Electromechanical test systems (7 with capacities from 500 lb to 20 kip (2.2 kN to 100 kN))
• Drop weight impact tester
• Fretting and reciprocating sliding tester
• Charpy impact tester
• Thermal aging and creep facilities

Major accessories and expertise include:

• Gripping / adapters for tension, compression, bending, fracture, etc.
• Various extensometers for axial, diametral, axial-torsion, high temperature, crack opening, etc.
• Digital image correction (DIC) accessories for full field, non-contact strain measurements
• Environmental chambers, ovens, and furnaces
• Induction heaters
• Temperature measuring devices (thermocouples, pyrometers)
• In-situ x-ray monitoring of damage
• Long-focal length optical microscopes for in-situ observations
• Specimen preparation, microstructure characterization prep, and image analysis
• Portable hardness tester

In addition, MPCF supports a wet lab with specific expertise on metallography and failure analysis to prepare samples for either mechanical property testing or for further analysis using tools in the Materials Characterization Facility (MCF) also administered through the Institute for Materials (IMat).

For more information, visit mpcf.gatech.edu.  Capability questions may be forwarded to Dr. Collins at james.collins@me.gatech.edu, or if you may submit a test proposal at mpcf.gatech.edu.